ASSIGNMENT PROBLEMS
1. Draw a schematic symbol for a solenoid controlled pneumatic valve and explain how the valve
operates.
2. We are to connect a PLC to detect boxes moving down an assembly line and divert larger
boxes. The line is 12 inches wide and slanted so the boxes fall to one side as they travel by.
One sensor will be mounted on the lower side of the conveyor to detect when a box is present.
A second sensor will be mounted on the upper side of the conveyor to determine when a larger
box is present. If the box is present, an output to a pneumatic solenoid will be actuated to divert
the box. Your job is to select a PLC, sensors, and solenoid valve. Details are expected with a
ladder wiring diagram. (Note: take advantage of manufacturers web sites.)
3. A PLC based system has 3 proximity sensors, a start button, and an E-stop as inputs. The system
controls a pneumatic system with a solenoid controlled valve. It also controls a robot with
a TTL output. Develop a complete wiring diagram including all safety elelemnts.
4. A system contains a pneumatic cylinder with two inductive proximity sensors that will detect
when the cylinder is fully advanced or retracted. The cylinder is controlled by a solenoid controlled
valve. Draw electrical and pneumatic schematics for a system.
5. Draw an electrical ladder wiring diagram for a PLC controlled system that contains 2 PNP sensors,
a NO pushbutton, a NC limit switch, a contactor controlled AC motor and an indicator
light. Include all safety circuitry
ليست هناك تعليقات:
إرسال تعليق